Page 2 of 2
Re: Broke it
Posted: March 23rd, 2008, 12:45 pm
by STEREODOG
psu has 1.5, 3.3, 5, 12 volt rails and it is possible to lose a 3v rail and still keep the 12v that the fans and lights run on.
Re: Broke it
Posted: March 23rd, 2008, 12:48 pm
by ratty
I stripped it down to cpu and psu and stopped there...still getting the no ram detected beep
Re: Broke it
Posted: March 23rd, 2008, 3:11 pm
by ratty
Well im taking it to a shop tomorrow and find out whats wrong with it and repair it myself =p hope its not the cpu >_> cant rly afford that to go and buy a new video card ='(
Re: Broke it
Posted: March 28th, 2008, 4:29 pm
by ratty
Woo!!!!!!! its back up!
Its turns out
1. It was trying to boot from wrong HDD
2. A cable was causing it to not boot properly but booted once disconnected
3. (really embarrassing one) When I took the ram out to test em one by one...I didn't properly seat one after putting all 4 back in
So it cost me $35 to get that simple embarrassing fix >_>